Joemars Fuzzy Logic Control System – “Probably the least complicated EDM machine available
At a single glance, the machine operator has a visual overview of the complete machining process. From the 3 axes, DRO showing the electrode position to the specific machining parameters, set by only 4 operator inputs:-
Electrode type and material to be machined
Electrode size
Electrode wear rate
Maximum current
Once the above is entered, the machine will auto set, and carry out machining automatically. It will alter setting if it encounters poor cutting conditions, and revert once they are cleared.
The fuzzy logic control system is a basic form of adaptive control it monitors the important machining parameters. If the machine encounters a problem whilst cutting, the parameters are automatically adjusted until the problem is cleared, then the control will revert to using the original settings.
Programmable Z axis – 50 programs which can be a single step or up to 10 steps
Each step can contain 12 different machining parameters. The machining parameters can be modified at any time during cutting without affecting the stored program.
Using the fuzzy logic control system, most users have seen considerable improvements in machining time, surface finish, especially when machining thin ribs and electrode wear rates.”
AZ series Set up and Controls Virtual Demo:
Please see below customer endorsement of this products:
