Joemars Fuzzy Logic Control System \u2013 \u201cProbably the least complicated EDM machine available<\/p>\n
At a single glance, the machine operator has a visual overview of the complete machining process. From the 3 axes, DRO showing the electrode position to the specific machining parameters, set by only 4 operator inputs:-<\/p>\n
Once the above is entered, the machine will auto set, and carry out machining automatically. It will alter setting if it encounters poor cutting conditions, and revert once they are cleared.<\/p>\n
The fuzzy logic control system is a basic form of adaptive control it monitors the important machining parameters. If the machine encounters a problem whilst cutting, the parameters are automatically adjusted until the problem is cleared, then the control will revert to using the original settings.<\/p>\n
Programmable Z axis \u2013 50 programs which can be a single step or up to 10 steps<\/p>\n
Each step can contain 12 different machining parameters. The machining parameters can be modified at any time during cutting without affecting the stored program.<\/p>\n
Using the fuzzy logic control system, most users have seen considerable improvements in machining time, surface finish, especially when machining thin ribs and electrode wear rates.\u201d<\/p>\n
AZ series Set up and Controls Virtual Demo:<\/p>\n