Jump to main content
-
Spark Erosion
-
Wire Erosion
-
EDM Hole Drills
-
Preowned
EDM Hole Drills
Manual CNC EDM Hole Drills
Manual Models
- Holes 0.3 to 3mm with 6mm option.
- Drills hardened steel, alloys, tungsten carbide.
- Integral 3 axis DRO.
- Fully automated cutting cycle.
- De-ionised water cutting fluid
- Fuzzy Logic for adaptive control of cutting conditions. (DZ models)
| Machine | Model 325D | Model 528D |
|---|
| Stainless Work Table, mm |
460x210 |
600x300 |
| X axis travel, mm |
330 |
350 |
| Y axis travel, mm |
200 |
250 |
| Z axis travel, mm (quill) |
345 |
345 |
| Back carriage, mm |
n/a |
200 |
| Electrode nose to table (min-max), mm |
100-250 |
5-355 |
| Guide travel |
150 |
150 |
| Component weight (max), kg |
100 |
450 |
| Digital Read Out |
Three axis |
Three axis |
| Electrodes | |
|---|
| Usable diameter, mm |
0.2-3.0 |
0.2-3.0 |
| Usable length, mm |
200-400 |
200-400 |
| Power Supply | |
|---|
| Machining current (max), A |
25 |
25 |
| Input voltage (AC), V |
AC 3 200-220 (50-60Hz) |
AC 3 200-220 (50-60Hz) |
| Input power (max), kVA |
3 |
3 |
| Dielectric | |
|---|
| Tank Capacity, L |
25 |
25 |
| Fluid type |
Distilled water |
Distilled water |
| Machine | |
|---|
| Machine weight approx, kg |
620 |
900 |
| Dimensions WxDxH, mm |
1465x865x2070 |
1545x1020x2070 |